Running boards are essential for vehicles like Ford F150 as they are high and inconvenient to climb in and out of the vehicle.
Therefore, you must know how to install running boards on Ford F150.
Along with providing a convenient stepping in and outside of your vehicle, installing ford power running boards can help improve the overall design of your vehicle.
With an aesthetic build, these running boards for Ford f150 SuperCab can enhance the overall visual appearance of your vehicle.
With the convenience and build, the running boards have become an integral up-gradation considered by most vehicle owners.
Ford f150 running board installation is not very complicated, and you can do it on your own with a little guidance. Therefore, we have provided a step-by-step guide to help you install the running boards without any inconvenience.
With this convenient guide, you can have your running boards installed in your vehicle in a matter of a couple of hours without any serious effort or professional help.
How to Install Running Boards on Ford F150: Full Procedures Step by Step
OE running boards are quite expensive and might not be affordable for most of you, but a modern aftermarket option is not just cheaper but is as efficient and effective as the OE running boards.
Below is the step-by-step guide on the Ford f150 running board installation procedure. With this convenient guide, you will install the running boards on your vehicle without any professional help.
Before getting into the process, make sure that you have all the required components and hardware with you to avoid any inconvenience afterward.
Step 1: Gather the Required Tools
First of all, make sure that you have all the required hardware for the installation procedure. Moreover, almost all running boards come with detailed instructions.
Consider keeping those instructions in front of you.
Now, starting from the driver’s side, there will be two holes in the rocker panel area of your vehicle near the front wheel. Lock washers, washers, and hex head bolts are included in the package of running boards.
Using these components, attach the mounting brackets to the two holes. Do not overtighten the bolts.
Step 2: Inspection
Inspection of the rocker area of your Ford F150 will be the second step of this installation procedure. However, an inspection of the rocker area is done by moving the vehicle tight into the center.
In this area, you will come across the other two holes required to mount the next bracket. Mount the bracket as explained in the first step.
Step 3: Mounting
Now, in this step, rear mounting brackets are mounted or installed.
For this, move to the rear of your Ford truck and look for the hole; this time, there will be only one hole for the mounting of a new frame. As explained in the first step, the same is the procedure for mounting the bracket in this step.
This is done by the wire net that comes with the running board kits. Make sure not to tighten the bolt of this bracket as well.
Step 4: Attachment
After you have all these brackets installed, no is the time to install the running board on the driver’s side of your vehicle. Take your running boards and place them onto the brackets.
Also, make sure to check if your running boards have any rubber strips; remove them in the case. Attach the running boards onto the brackets installed and slide the bolts into the groves.
Bolts are included in the running board kits.
Step 5: Ensure the Proper Adjustment
After you have mounted all the brackets and placed the running board onto them, you will have to align the step bars perfectly.
Take your time and make sure that the step bars are perfectly aligned to have the best outcome of the installation procedure. Now is the time to tighten them for all those hardware and bolts that you have left untightened.
Circle your vehicle to each installation point of mounting brackets and tighten all the bolts and hardware separately.
Step 6: A Fresh Check-up
The same steps and procedure are repeated while installing the running boards on the passenger side as well. Find the holes, mount the brackets, place the running boards, align the step bars perfectly, and tighten all the hardware and you are good to go.
This how-to install running board on the Ford f150 guide is a very simple step-by-step convenient guide with detailed instructions.
Undoubtfully, this guide will help you get your running boards installed in less than an hour. Installing ford power running boards is not a complicated process, and with these simple instructions, it is made even easier.
Also, the manufacturers deliver the instructions with the running board kits that can be followed and considered while installing the running boards for ford f150 SuperCab.
Important Ford F150 Power Running Boards Problems
Various problems can be observed in your Ford f150 power running boards. But most of them can be resolved immediately without much effort if recognized in time.
Before deciding whether ford power running board motor replacement is required or not, try to detect the actual problem. It is not necessary that a replacement might be required.
Shaking during operation
If your running board steps shake or shutter during their operation, there might be a possibility that they have a bad ground or the connection is not tight and secure.
In this case, whenever you will open or close the door or step onto the running boards, they will start shaking.
Creaking sound is made
One of the problems faced by the running boards includes the creaking sound made by them.
In this case, whenever you step onto the running board, a creaking sound is produced. To solve this problem, you will have to tighten the wedge bolt, or lower mount bolts are required to be loosened and step extrusion to be reinstalled.
Random operation of the steps
In some cases, the power running board steps start to operate randomly without any cause.
This can be due to certain reasons, including that you might have a faulty diode or they might be connected in reverse polarity. Also, there is a possibility that you might have your steps connected to the wrong wire in the electrical system of your vehicle.
Or in some cases, there can be an insecure connection that might be causing this random operation of the steps.
Suppose you are facing problems regarding your power running board steps, especially if they are completely inoperative. Many reasons can be behind this inoperative step.
In such a case, there is a possibility that you have a burned fuse, faulty or reverse connected diodes, insecure connection, or incorrect connection of wire in the electrical system of the vehicle.
Motor running even if steps are not working
Sometimes, you can observe the motor of your power running boards running continuously even when the steps are down.
A motor can be heard running all the time while the running boards are not operating. There is probably a fault in the clutch assembly or the tolerance ring for this type of problem.
To solve this problem, you will have to replace the faulty clutch assembly with a new one.
Ford Power Running Board Motor Replacement
Ford power running board motor replacement is necessary in any case if the old motor fails to function.
Therefore, we have provided below the simplest step-by-step guide to help you replace the motor by yourself without any professional help.
For the replacement of the power running board motor, you will need the following things or tools;
- Floor jacks
- Socket wrench
- Penetrating oil
- Jack stands
Jack up your vehicle
The first step for the running boards motor replacement is to jack up your vehicle. Make sure that your vehicle is on an even surface, and don’t forget to add the jack stands to ensure that your vehicle remains in its place.
Remove the running boards
Once you have your vehicle jacked up, you will have to remove the running boards. Make sure to remove every bolt from both the running boards.
Use penetrating oil on the bolts if you are facing any difficulty in removing the bolts.
Clean the running boards
After you have your running boards removed, clean them properly. By cleaning the running boards, you will enhance the performance of the motor.
Remove the motor
Now, after removing your running boards, you will have to remove the motor as well. Remove the motor, spray the bolts with penetrating oil for your convenience, and then use a wrench socket to take out all the bolts.
Install the new motor
In the final step, you will have to install the new motor. Please take all the bolts you removed first and attach the new motor onto the running board.
Do this for both sides, and you will have your new motor installed.
Reinstall the running boards
After you have your new motor installed into the power running boards, place the running boards in their position and tighten all the bolts.
Make sure that you have cleaned your running boards properly before reinstalling them.
Common FAQs Regarding How to Install Running Boards on Ford F150
How much does it cost to install running boards f150?
The average money that will cost you for installed running boards might be around $300-$350, including the installment labor.
While in the case of the electric or power running boards, they are quite expensive and can cost up to $1800 or less.
Can you install running boards yourself?
Modern aftermarket running boards are very easy to install and don’t require as much effort.
By following the instructions mentioned above, you can easily install the running boards in your vehicle by yourself without having to go to a mechanic for professional help.
Are running boards worth it?
Running boards serve a variety of different purposes and benefits.
Running boards provide a convenient step for your vehicle and enhance the overall visual appearance of the vehicle. Along with these benefits, it is also an excellent choice if you are willing to lift your truck.
Therefore, these benefits show that this up-gradation is worth your money and can help you achieve various purposes at a single time.
How long does it take to install side steps?
On average, running boards installation requires only one to two hours as it is a quite simple procedure.
Although installation is quite straightforward, it might take more time than this if you are completely inexperienced.
Even though it might take a slightly greater time, the installation will still not be very complicated with the appropriate instructions, even if you are inexperienced.
Are Ford running boards universal?
A wide variety of running boards are available in the market that is compatible with ford; some are universal while the others are model or brackets specific.
Moreover, some running boards do not require any additional cutting or drilling, while cutting and drilling are required in some cases.
How do I lower my running boards?
Lowering the running boards is not a simple procedure and might require some professional help. Contrary to the installment procedure, it isn’t very easy and cannot be performed by common vehicle owners.
To lower your running boards, you will either require to compromise on the frame of your truck or even get some fabrications done by the professional to introduce special parts for the purpose.
What is the difference between side steps and running boards?
Step bars are usually narrower than the running boards and provide space for a single step at a time.
At the same time, the running boards are wider and provide a more comfortable step than the side steps. Also, in step bars, extra space is left between the side and the vehicle, which is not the case with the running boards.
Moreover, side steps offer less ground clearance. Due to less ground clearance, they cannot provide an easier step in the case of lifted vehicles. Therefore, running boards are preferred and suggested if you want a more convenient step.
How do I choose a running board?
While choosing a running board for your vehicle, you should consider various factors to help you choose the best running board for your truck.
Among these factors, the running boards’ size, durability, finish, non-slip factor, and shape are considered. All these factors help you choose the running board of your choice that fulfill all your requirements.
Also, make sure to consider the design of your running board as it is responsible for improving the overall visual appearance of your vehicle.
Running boards have become quite a necessary upgrade due to the number of benefits and purposes that it serves. A variety of modern aftermarket running boards are available that are cost-effective and serve the purpose efficiently.
Therefore, we have solved all your queries regarding how to install running boards on Ford F150 so that you can do the installation yourself.
Along with the running boards’ installation guide, we have provided you with the power running board motor replacement guide and all the problems observed in the running boards to provide you with enough information on the subject.
Make sure to choose the running boards that are compatible with your vehicle and fulfill all your requirements, and you are good to go.